Why choose Falcon Steel?
Sample service
Get the latest Brochure
Falcon Steel

FCP200 Plastisol

Typical applications

Falcon Leathergrain is well suited for profiled wall cladding, roofing and associated fixtures and fittings.

This product can be used in both industrial and marine applications and has excellent performance where assurance of longevity, durability and reliability are required.

Product Data

Falcon Leathergrain Plastisol is manufactured to exacting standards on state of the art coil coating equipment.

Substrates of the highest quality ensure the production of an aesthetically and technically superior product with the benefit of longer life and high resistance to the elements.

  • Textured two coat Plastisol paint system
  • Excellent corrosion protection
  • Standard colours per colour chart
FCP200-Plus
Substrate  
Hot Dipped Galvanized DX51-S320GD
Zinc Coating Range Z100 - Z275
Typical Gauges: 0.4 - 0.7
Widths 1220mm - 1250mm
Produced to: EN 10326/10327
Tolerances to: EN10142/10143
Typical Yield Point: 280/300 µM

 

Typical Properties Specification Test Method
Dry Film Thickness 180-220 µM ECCA T1
Gloss (60°) 50-80 ECCA T2
Pencil Hardness N/A ECCA T4
Reverse Impact 160 in lbs
 ECCA T5
T- bend Flexibility 0 1T ECCA T7
Adhesion Erichsen Indent 7.5mm BS3855
Solvent Resistance N/A ECCA T12
Taber Abrasion Resistance 10/12mg loss  

 

Colour Specification

A good visual colour match to an agreed standard. When instrumental colour results are quoted, they must be to CIELAB equation, illuminant D65, 10° angle.

Results to be quoted as Delta L (darker/lighter), Delta a (redder/greener), Delta b (yellow/bluer) and Delta e the overall Colour Difference.

Colour Stability

This product is formulated to exhibit minimum colour change due to shear and to show no metamerism.

  • White 00E55White 00E55
  • Buttermilk 10C31Buttermilk 10C31
  • Bamboo 18C35Bamboo 18C35
  • Aztec Yellow 10E55Aztec Yellow 10E55
  • Grey White RAL 9002Grey White RAL 9002
  • Willow 12B17Willow 12B17
  • Moorland Green 12B21Moorland Green 12B21
  • Saffron 08E53Saffron 08E53
  • Pigeon Grey 18B17Pigeon Grey 18B17
  • Mushroom 10B19Mushroom 10B19
  • Goosewing Grey 10A05Goosewing Grey 10A05
  • Leaf Green RAL 6002Leaf Green RAL 6002
  • Poppy Red 04E53Poppy Red 04E53
  • Wedgewood Blue 18C37Wedgewood Blue 18C37
  • Marine Blue 18E53Marine Blue 18E53
  • Olive Green 12B27Olive Green 12B27
  • Merlin Grey 18B25Merlin Grey 18B25
  • Ocean Blue 18C39Ocean Blue 18C39
  • Terracotta 04C39Terracotta 04C39
  • Black 00E53Black 00E53
  • Sapphire Blue RAL 5003Sapphire Blue RAL 5003
  • Vandyke Brown 08B29Vandyke Brown 08B29
  • Juniper Green 12B29Juniper Green 12B29
  • Slate Blue BS 9098Slate Blue BS 9098

Colour Range special notes
  • The on screen colour due to variation in monitor display is provided to indicate the colours given as a representation of finish it may not provide the decision maker with the exact colour or effect.
  • If critical to the project hand samples can be made available to ensure a more exact colour match or product likeness.
  • It should be noted that during the production process of any coil coated product some colour or texture variation may occur between coils produced at different times or batches.
  • If colour tone or directionality is critical then cladding from the same batch should be used on the same side of building or elevation.

FCP 200 Plastisol Guarantee

The guarantee applies to the adhesion of the paint film of Falcon FCP 200 Plastisol products
which are to be used in building construction and produced by Falcon Steel.

The terms of the guarantee are available after the registration of the building has been completed. The plastisol adhesion is guaranteed from commissioning of the building to the point at which first full

painting is expected as set out in the table below. The length of the period to first full repainting will vary, in accordance with colour selection, building location and plane.

 

Rural Guarantee
Costal Guarantee

 

Brand A colours

  • Willow 12B17Willow 12B17
  • Wedgewood Blue 18C37Wedgewood Blue 18C37
  • Pigeon Grey 18B17Pigeon Grey 18B17
  • Goosewing Grey 10A05Goosewing Grey 10A05
  • White 00E55White 00E55
  • Buttermilk 10C31Buttermilk 10C31
  • Merlin Grey 18B25Merlin Grey 18B25
  • Moorland Green 12B21Moorland Green 12B21
  • Mushroom 10B19Mushroom 10B19
  • Olive Green 12B27Olive Green 12B27
  • Olive Green 12B27Grey White RAL 9002
Brand B colours
  • Black 00E53Black 00E53
  • Leaf Green RAL 6002Leaf Green RAL 6002
  • Juniper Green 12B29Juniper Green 12B29
  • Ocean Blue 18C39Ocean Blue 18C39
  • Slate Blue BS 9098Slate Blue BS 9098
  • Terracotta 04C39Terracotta 04C39
  • Vandyke Brown 08B29Vandyke Brown 08B29

Falcon Steel Guarantee Application form (FCP 200 Plastisol)

  • The form must be completed and sent to Falcon Steel Ltd within six months of the building being handed over to the client. The form can be filled in online.
  • An acknowledgment of the registration form will be issued.
  • Notification of any claim must be given before 10% of defective material prevails in any single planes.

Proprietors name and address
A value is required.
Location of building
A value is required.
Start date of construction
A value is required.
Completion date of construction
A value is required.
Building usage
A value is required.
Roofing contractor
A value is required.
Main contractor
A value is required.
Profile manufacturer
A value is required.

Wall colour
A value is required.
Roof colour
A value is required.

Roof Area (m²) A value is required.

Wall Area (m²) A value is required.

Prevailing environment (tick as applicable)
Less than 1.0 mile from shoreline
More than 1.0 mile from shoreline You must select one environmentYou can only select one environment You must select one environmentYou can only select one environment

Signed A value is required.

Status A value is required.

Refrence A value is required.

email A value is required.Invalid format.